✓ The faults of this engine were checked against sources (10/2026). Each item has at least two independent sources or an official recall or parts-maker technical note.
Recall: low-pressure fuel pump impeller can swell, engine may stall
usually 0–200,000 km · High risk
model years 2017–2020 only
Signs: Hard starting, rough running, then the engine can stall while driving and not restart
Fix: Check with a Mazda dealer whether the recall was done; the in-tank fuel pump is replaced free of charge
€0–450
Recall: cylinder deactivation software (2.5)
usually 0–150,000 km · Medium risk
model years 2017–2019 onlyengine codes: PY-VPS, PY-VPH
Signs: Loss of power or engine faults linked to the cylinder deactivation system
Fix: Check with a Mazda dealer that the engine control software update was done (free)
€0–150
Rough idle / misfire: carbon stops the EGR valve closing (2.5)
usually 40,000–180,000 km · Wear part
model years 2016–2021 onlyengine codes: PY-VPS, PY-VPH
Signs: Occasional rough idle with random misfire code P0300
Fix: Update the engine software (relearns the EGR closed position); clean or replace the EGR valve with a new gasket
€50–400
Carbon build-up on intake valves / injectors at high mileage
usually 120,000–250,000 km · Wear part
Signs: Rough cold idle, hesitation, slight power loss and higher fuel use; worse with long oil intervals or a failed PCV valve
Fix: Check and replace the PCV valve, clean the injectors and intake valves (walnut blasting if heavy); keep oil changes at 15,000 km or less
€100–500